If your order fits into a USPS flat rate box it will ship via USPS flat rate priority mail. If the parts are too large for the USPS flat rate boxes the order will be shipped via UPS ground. Orders over 150 pounds will be shipped via common carrier.
Customer Service
- Weight Distributing Hitch
- Other Products
- Vehicle Side
- PN 507 - 8 hole height adjustment channel for 1-1/4" receiver tubes.
- PN 513 Hitch on 1-1/4" square bar
- 501 - Slides into a standard 2" receiver tube
- 511 - Slides into a standard, 2" receiver tube. Can be set 2 1/2" higher or lower than receiver tube.
- Limiter Model -303- Hitch for use with your Drop/Rise bar
- Lashing Hook
- Hitch pin for 500 series
- 517 - Slides into standard 2" receiver tube. Can be set 4" higher or lower than receiver tube.
- PN 515
- Limiter Model -301- Hitch that slides directly into a 2" receiver tube
- 503 - Bolts directly inside of standard, 3 inch wide, height adjustement channel. 2 7/8" wide.
- VS 519 Extended length height adjustment channel
- VS601 Vehicle side weight distribution hitch
- VS503 and VS505 Package
- PN 505 - Height adjustment channel on 2" tube with 4 sets of holes
- VS503 and VS515 Package
- VS503 and VS519 package
- Trailer Side
- 504 - V-shaped, industry standard, 50 degree bracket.
- 550 - 50 degree trailer end cap
- TS512 Height adjustment channel welded to a 50 degree bracket
- 510 - Slides into a standard 2" tube
- 508 - Bolts or welds onto any 3" wide trailer tongue
- 502 - Bolts directly inside of standard, 3 inch wide, height adjustement channel. 2 7/8" wide.
- Limiter Model -102- Coupler with rotation limiter that can be welded to your custom application.
- Limiter Model -104- Coupler with rotation limiter that bolts to a 3" wide trailer tongue
- Limiter Model -106- Coupler with rotation limiter that bolts to a 2-1/2" wide trailer tongue
- TS 516 - 8" tall adjustable height channel bracket
- Lashing Hook
- 520 - 15" long and slides into standard 2" receiver tube
- 528 - Bolts or welds onto any 2" wide trailer tongue.
- Limiter Model -108- Coupler with rotation limiter attached to a 50 degree angle bracket (PN 108)
- Limiter Model -112- Coupler with rotation limiter that slides into standard 2" receiver tube.
- 506 - Bolts or welds onto any 2-1/2" wide trailer tongue.
- 514 - Welds directly to trailer tongue or custom brackets. 3" x 2-9/16" base.
- 526 - Coupler on a 30" long 2" square extention tube
- 518 5-position Adjustable Height Channel Bracket - Weld On
- TS530 Horizontally mounted flat plate with four 13.5mm holes
- TS602 Trailer side weight distribution hitch
- TS 532 Bolts or welds onto any 2" wide trailer tongue.
- TS540 A-frame with height adjustment channel
- PN 505 - Height adjustment channel on 2" tube with 4 sets of holes
- Browse
Lock 'N' Roll
2141 S. Spaulding Ave. Chicago, IL 60623
Toll-Free 800-399-5182 Local 773-277-2800
Fax 773-277-9622
Copyright © 2024 Great Lakes Forge Co., Inc.
i-Tul Design & Software
