Company
- Weight Distributing Hitch
- Other Products
- Vehicle Side
- PN 507 - 8 hole height adjustment channel for 1-1/4" receiver tubes.
- PN 513 Hitch on 1-1/4" square bar
- 501 - Slides into a standard 2" receiver tube
- 511 - Slides into a standard, 2" receiver tube. Can be set 2 1/2" higher or lower than receiver tube.
- Limiter Model -303- Hitch for use with your Drop/Rise bar
- Lashing Hook
- Hitch pin for 500 series
- 517 - Slides into standard 2" receiver tube. Can be set 4" higher or lower than receiver tube.
- PN 515
- Limiter Model -301- Hitch that slides directly into a 2" receiver tube
- 503 - Bolts directly inside of standard, 3 inch wide, height adjustement channel. 2 7/8" wide.
- VS 519 Extended length height adjustment channel
- VS601 Vehicle side weight distribution hitch
- VS503 and VS505 Package
- PN 505 - Height adjustment channel on 2" tube with 4 sets of holes
- VS503 and VS515 Package
- VS503 and VS519 package
- Trailer Side
- 504 - V-shaped, industry standard, 50 degree bracket.
- 550 - 50 degree trailer end cap
- TS512 Height adjustment channel welded to a 50 degree bracket
- 510 - Slides into a standard 2" tube
- 508 - Bolts or welds onto any 3" wide trailer tongue
- 502 - Bolts directly inside of standard, 3 inch wide, height adjustement channel. 2 7/8" wide.
- Limiter Model -102- Coupler with rotation limiter that can be welded to your custom application.
- Limiter Model -104- Coupler with rotation limiter that bolts to a 3" wide trailer tongue
- Limiter Model -106- Coupler with rotation limiter that bolts to a 2-1/2" wide trailer tongue
- TS 516 - 8" tall adjustable height channel bracket
- Lashing Hook
- 520 - 15" long and slides into standard 2" receiver tube
- 528 - Bolts or welds onto any 2" wide trailer tongue.
- Limiter Model -108- Coupler with rotation limiter attached to a 50 degree angle bracket (PN 108)
- Limiter Model -112- Coupler with rotation limiter that slides into standard 2" receiver tube.
- 506 - Bolts or welds onto any 2-1/2" wide trailer tongue.
- 514 - Welds directly to trailer tongue or custom brackets. 3" x 2-9/16" base.
- 526 - Coupler on a 30" long 2" square extention tube
- 518 5-position Adjustable Height Channel Bracket - Weld On
- TS530 Horizontally mounted flat plate with four 13.5mm holes
- TS602 Trailer side weight distribution hitch
- TS 532 Bolts or welds onto any 2" wide trailer tongue.
- TS540 A-frame with height adjustment channel
- PN 505 - Height adjustment channel on 2" tube with 4 sets of holes
- Browse
Company
Sign Up for Savings Alerts!
Lock 'N' Roll
2141 S. Spaulding Ave. Chicago, IL 60623
Toll-Free 800-399-5182 Local 773-277-2800
Fax 773-277-9622
Copyright © 2026 Great Lakes Forge Co., Inc.
i-Tul Design & Software
